No Products in the Cart
Mix MeshForce routers and dots to get best WiFi solution for your home.
Reliable and consistent WiFi signal goes where you go.
Add routers or dots to current MeshForce network to meet growing WiFi requirements.
Wireless signal goes directly towards compatible wireless devices. No waste, no wait.
Analyze and repair itself when there is network connection problems.
Automatically allocate channels for multiple devices to minimize interference.
Mesh nodes automatically recognize each other and get connected.
Manage your home WiFi without hassle through My Mesh App.
Create a full mesh network to blanket your whole home with reliable, fast, seamless WiFi. Two separate routers, double network capability but sharing one WiFi name.
Seamless roaming, strong signal
everywhere in your home.
Automatically configure out of the box.
Automatically repairing itself
when problems arise.
One SSID for whole-home network.
Only spotty WiFi in certain areas of home,
even gets weaker as you move around.
Takes hours to get every nodes connected.
Failed connection must be fixed
with manual intervention.
Multiple SSID for different nodes.
Install My Mesh App
Connect the main router to your modem,
and plug add-on nodes into wall socket.
Follow the App instructions,
set up WiFi name and password.
Reliable coverage up to 3,000 sq. ft.
2.4GHz: up to 300Mbps, 5GHz: up to 867Mbps
90mm x 90mm x 90mm
WPA2-PSK (default), DHCP server, DHCP client list, IPsec pass through, PPTP pass through, L2TP pass through, UPnP, Dynamic IP, Static IP, Bridge Mode
100-240V, 50-60 Hz, 0.6A
2x3 dBi internal antennas, simultaneous dual-band 2.4GHz and 5GHz, SSID broadcast, beamforming, WiFi IEEE 802.3/u, IEEE 802.11 ac/a/n/b/g/n
2 x 100M Ethernet port, WAN and LAN on primary mesh node; Both act as LAN ports on additional mesh points
Smart QoS, parental control, guest network, firmware upgrade online, reset to factory settings