No Products in the Cart
One router plugs to the modem and one satellite plugs to wall socket together provides up to 3,000 sq. ft.
Mix MeshForce routers and dots to get best WiFi solution for your home.
Reliable and consistent WiFi signal goes where you go.
Add routers or dots to current MeshForce network to meet growing WiFi requirements.
Wireless signal goes directly towards compatible wireless devices. No waste, no wait.
Analyze and repair itself when there is network connection problems.
Automatically allocate channels for multiple devices to minimize interference.
Mesh nodes automatically recognize each other and get connected.
Manage your home WiFi without hassle through My Mesh App.
Create a full mesh network to blanket your whole home with reliable, fast, seamless WiFi. Delivers WiFi signal all the way to every corner, ignoring big thick walls.
Seamless roaming, strong signal
everywhere in your home.
Automatically configure out of the box.
Automatically repairing itself
when problems arise.
One SSID for whole-home network.
Only spotty WiFi in certain areas of home,
even gets weaker as you move around.
Takes hours to get every nodes connected.
Failed connection must be fixed
with manual intervention.
Multiple SSID for different nodes.
Install My Mesh App
Connect the main router to your modem,and plug add-on nodes into wall socket.
Follow the App instructions,set up WiFi name and password.
Reliable coverage up to 3,000 sq. ft.
2.4GHz: up to 300Mbps, 5GHz: up to 867Mbps
M3: 91mm x 91mm x 93mm (3.58” x 3.58” x 3.66”)
M3 dot: 114mm x 68mm x 45mm (4.48" x 2.67" x 1.77")
M3: 207g each
M3 dot: 172g each
WPA2-PSK (default), DHCP server, DHCP client list, IPsec pass through, PPTP pass through, L2TP pass through, UPnP, Dynamic IP, Static IP, Bridge Mode
M3: 100-240V, 50-60 Hz, 0.6A
M3 dot: 100-240V, 50-60 Hz, 0.3A
M3: 2x3 dBi built-in omni-directional antennas,
M3 dot: 2x3 dBi built-in omni-directional antennas,
simultaneous dual-band 2.4GHz and 5GHz, 2x2 MU-MIMO, SSID broadcast, beamforming, WiFi IEEE 802.11.ac/a/n/b/g/n
M3: 1 x Gigabit LAN/WAN Ethernet port, 1 x Gigabit LAN Ethernet port
M3 dot: 1 x Megabit LAN Ethernet port
Install My Mesh APP, requires iOS 8.0 or later, Android OS 4.0 or later
Smart QoS, parental control, guest network, firmware upgrade online, reset to factory settings